Work and Software for Machine Shops

Overflow and short-run machining, custom fixtures, and the CAM software and training to program your own machines.

A cast lever drops onto a locating pin and rests, red-handled toggle clamps lock it, both bosses are drilled, and the next blank loads.

Machine shops come to Nielsen Enterprises two ways: for parts and fixtures when their own machines are full or a job is outside their usual work, and for the CAM software, support and training that keeps their own shop programming.

Parts and fixtures

  • Short runs of 1 to 50 parts. We program, fixture and machine them in our own shop on 2, 3 and 4-axis machines. The setup that makes the first part makes the rest. See Short-Run Production.
  • Custom fixtures and jigs. With decades of experience and thousands of fixtures behind us, we design holding for milling, drilling, welding and inspection that cuts your setup time. See Fixtures and Jigs.
  • Complex 3D shapes and parts with multiple setups. See CNC Machining.
  • Reverse engineering when a customer hands you a part with no drawing. See Laser Scanning and Reverse Engineering.

Software for your own machines

Nielsen Enterprises sells, supports and teaches CAM software to shops like yours:

  • SURFCAM for 2 to 5-axis milling, turning, mill/turn and wire EDM, with Waveform roughing for faster, gentler cuts.
  • Predator for checking G-code before it runs, editing programs, and sending them to every machine on the floor over DNC.

We run training classes from the basics to advanced multi-axis milling and turning, and our support team helps when a job is stuck. Book a demo to see the software on parts like yours.

What customers say

Nielsen has completed many projects for us and they always make it right and on time.

Darrell Harmer
CON-TEK Machine

Have a part, a drawing or a sketch?

Tell us what you need made. Quotes are free.